Bathroom

Replace a cracked floor tile

One cracked tile can be replaced without redoing the floor. The job is getting it out without damaging the tiles around it: cut out the grout first, then break the cracked tile from the middle with a hammer and chisel and work outward. A spare tile from the original job makes the rest easy.

Quick answerCut out the grout around the cracked tile, break it from the center outward with a chisel, scrape out the old mortar, then set a new tile in fresh thinset and regrout.
Hard2–3 hrs, plus curing$15–40
Tiled floor with one cracked tile, the grout around it cut out and neighbors taped, a chisel angled toward the center, and a tile, thinset and subfloor cross-section
Replacing a cracked tile: cut the grout out first (1), chisel from the center outward (2) with the neighbors taped (3), and rebuild tile, thinset and subfloor (4).

Why the grout comes out first

Floor tile sits in a layer of mortar called thinset, with grout filling the joints. The grout ties neighboring tiles together, so if you start chiseling before the grout is cut, the shock can crack the tiles next door. Cutting the grout out first isolates the broken one.

A crack running through several tiles in a line, or tiles that sound hollow when you tap them, usually points to movement or poor support underneath. A new tile will crack again until that's fixed.

Why tiles crack

A dropped object

One cracked tile, often with a chip at the impact point.

A hollow spot underneath

Tile that wasn't fully supported by mortar cracks under load.

Floor movement

Cracks running across several tiles point to the subfloor or slab.

No expansion gap

Tile packed tight against walls can crack as it expands.

Is it just one tile?
What you seeLikely causeWhat to do
One cracked tile, often after a dropImpactReplace the tile.
A crack across several tiles in a lineFloor movementHave the floor checked first.
Tile sounds hollow when tappedPoor mortar coverageReplace it, and tap around for others.
Cracks near walls or doorwaysNo expansion gapHave a tile setter look.
Protect your eyes and the tiles around itWear safety glasses and gloves; tile chips are sharp and fly. Grout and thinset dust contains silica, so wear an N95 or better and clean up with a HEPA vacuum, not a broom. If the floor dates from before about 1980 and there's black adhesive under the tile, have it tested before you chisel. Keep the chisel angled toward the center of the broken tile so it can't slip into the next one.

Let's fix it

0 of 5 done
  1. Cut out the groutPut painter's tape on the edges of the neighboring tiles to protect them, then cut the grout all the way around the cracked tile, down to the thinset, with a grout saw.
    Grout saw cutting the grout joint around a cracked floor tile, with tape on the neighboring tiles
  2. Break it from the middleWith safety glasses on, tap the center of the tile with the chisel and hammer to break it, then work outward. If it won't break cleanly, drill a few holes through the center with a masonry or carbide bit first. Angle the chisel toward the middle of the tile, never toward the good ones.
    Chisel angled toward the center of the cracked tile, tapped with a hammer
  3. Clean out the old mortarChip and scrape the old thinset down far enough that the new tile, with fresh thinset, will sit level with its neighbors. Vacuum out the dust.
    Stiff putty knife scraping old thinset from the empty tile space
  4. Set the new tileSpread thinset with the notched trowel and butter the back of the tile. Press it in with a slight twist, aiming for full coverage with no hollow spots, since a hollow spot may be what cracked the last one. Check with a straightedge that it's level with the tiles around it, clean mortar out of the joints while it's still soft, and let it cure as long as the bag says.
    New tile pressed into fresh thinset and checked level with a straightedge across its neighbors
  5. Grout and clean upPack grout into the joints with the float and shape them to match the rest. Once it firms up, often 15 to 30 minutes (check the bag), wipe the excess with a barely damp sponge, then buff off the haze with a dry cloth once it dries. Keep foot traffic off until it cures.
    Grout float packing fresh grout into the joints around the new tile, then a damp sponge wiping the haze

If the new tile sits high or low

If the new tile sits high, lift it before the thinset sets, scrape out some mortar and reset it. If it sits low, add a little more thinset underneath.

If the grout color doesn't match at first, give it a few days; many grouts lighten as they cure. A grout colorant can even it out if it doesn't.

Look for a spareCheck the garage or basement for leftover tiles before you shop. If there aren't any, take the broken pieces to a tile store to match the size, color and thickness.
Renting?If you rent, report a cracked tile to your landlord rather than replacing it. It can point to a floor problem that's theirs to fix.
Call a tile setter ifSeveral tiles are cracked in a line, tiles sound hollow or move, the floor flexes, or the tile is natural stone or very large. Those need the cause fixed or specialized handling.

What a pro typically charges (a rough estimate; prices vary by area): A tile setter typically charges $150–$400 to replace one or a few tiles, depending on access and matching.

Something else going on?

Tile replacement questions

Can I replace one tile without removing others?

Yes. Cut the grout first so the tiles around it aren't disturbed, then break out only the cracked one.

What if I can't find a matching tile?

Take a piece to a tile store. If there's no match, some people borrow a tile from a hidden spot, like under the fridge or in a closet, and put the near-match there instead.

How long before I can walk on it?

Follow the thinset and grout labels. Often it's about a day before light foot traffic, and longer for a full cure.

Can I just fill the crack instead?

A tile repair kit can hide a hairline crack for a while, but a cracked tile can break further and let water under it.

If I rent, should I replace a cracked tile?

Tell your landlord instead. A cracked tile can point to floor problems they'll want to know about.

Still stuck? Ask us

Tell us what you're seeing and what you've tried. We read every question, and the ones that will help other people get answered on this page.

We may publish your question on this page, never your name or email. Please don't include personal details. Privacy

About the authors

GrabTheHammer Team

We're a small team of writers and editors who check every guide against manufacturer instructions and common code requirements. Our goal is to help you understand the problem, tackle what you safely can and know when to call a pro.

Checked against: Manufacturer instructions for the parts and products involved, OSHA silica dust guidance.

How we write and review →
A helpful next stepClean dirty grout without harsh chemicalsBaking soda paste, a stiff brush, then a coat of sealer.